With Sludge Management And Reuse Technologies'
SMART BOX, you get lower
first cost, lower operating cost, a very low annual maintenance cost, a drying
process that takes hours not days or weeks, a box that is easy to install and
inexpensively expanded to fit your plant's needs.
| Proven Applications |
|
• Municipal
Waste Water Plants
Sludge Dewatering
Rag Bin Dewatering
Grit Bin Dewatering
• Grease Trap & Porta-Potty Waste
• Beef, Pork & Poultry Processing
Plants, Feed Yards and Dairies
• Paunch Waste Dewatering
• Animal Rendering Plants
• Food Processing Plants
If you don't see your application here,
Just Ask, We Can Design It!
|
|
| Proven Results |
• TSS
levels lowered by 95%+
• BOD/COD levels lowered by 75%+
• FOG levels lowered by 75%+
• Significant Reduction
in Phosphorous & Chloride levels
• Paint
Filter/Drip Tests are passed consistantly, typically in 10-14 hours
• Disposal and Hauling costs
are greatly reduced
since moisture volume is greatly reduced. |
| Customer Service |
|
• Our management & design team
has 12+ years of experience
in Dewatering Applications.
• SMART has a network of Knowledgeable
Manufacturer's Reps and Distributors.
• Local Rep or Distributor is available for your Start Up, Training and
Troubleshooting needs.
|
|
Superior Dewatering System Design
SMART has designed our box to dewater
faster, last longer, and be operator/maintenance
friendly by offering a wide variety of
the most durable filtration media available in the industry
from 1" clear opening down to 50 micron. In addition,
we offer the largest screen area on the market and our
management team consists of a Mechanical
Engineer and the former
owner of a Type V Grease and Grit Trap Disposal Company.
 |
LEFT:
Pictures of a competitors unit that failed
after 3 yrs because of internal component
corrosion.
RIGHT:
At SMART, we test different materials for
corrosion resistance in 40% phosphoric acid
solution to avoid this. |
 |
|
 |
LEFT:
Competitors unit that dewatered sludge stick
to screens due to screen design and back
draining due to faulty drain system.
RIGHT:
Filtrate draining out of unit due to faulty
drain design and no floor screen. |
 |
|
Superior Polymer Injection System
Our Polymer Injection System utilizes a patented state of the art mixing chamber
to completely and efficiantly
distribute the polymer into the waste stream.
Multiple Sizes and Styles
SMART can design and build the size and style of Dewatering System best suited
to your needs; capacities of one half yard to 105 yards are available. Models
available in Roll On/Roll Off, Trailer Mounted, Manual Self Dumping, and Hydrolically
Assisted Self Dumping.
Advantages Over Drying Beds, Belt
Presses and Filter Presses
With Sludge Management And Reuse
Technologies' SMART BOX, you start
dewatering immediately, installation takes
only a few hours. Sludge
dries consistantly to whatever degree
desired by the customer in
the same amount of time, every time, regardless
of weather or season, allowing the plant to be wasted
on a regular schedule. There are no moving parts in
or near the waste stream to corrode or seize. Your first
cost is typically 1/3rd that of a comparable Drying
Bed or Belt Press.
Finally,
annual maintenance of the SMART Dewatering System is
$200-$300! Really!!
Flexible
Financing Options Available through CAPITAL PARTNERS
Click
here to download a PDF with more financing information.
Contact SMART by clicking here |
